| Consultancy |
TENDERS
& CONTRACTS
It is vitally important that tender and contract
documents are properly prepared to ensure that as far as possible
no problems will arise which might for instance result in subsequent
escalation of costs during build. DMC&A are able to advise on
or undertake the drafting of these documents. Most clients find that
the detailed technical analysis of tenders difficult to comprehend
without professional advice. |
|
|
SPECIFICATIONS
It is only by carefully preparing a detailed specification
that a vessel can be built to meet the requirements of the Client.
Without professional advice at this stage, not only may the vessel
finally built be unsuitable for the purposes intended, but the costs
resulting from variations at later stages can be excessive. Past
experience shows that a more satisfactory vessel is achieved with
our input on
the specification stage of contract |
|
|
MCA
CODES OF PRACTICE
DMC&A can undertake
certification of vessels to the MCA Small Craft Code and advise on
code-related matters. Documents required such as stability books or
structural assessments can be prepared. We are also employed to
advise on vessels greater than 24m load line length, to meet the
various MCA requirements. |
|
|
MODIFICATIONS
From major alterations such as lengthening, hull
modifications and change of engines or rig to smaller tasks such as
addition of deck fittings DMC&A can carry out s survey and prepare
a specification and design for the work required. |
|
|
STABILITY
ASSESSMENTS
DMC&A has carried out many stability assessments
both for stability information books and analysing particular problems
including dynamic stability of fast vessels. Project vessels have
included large motoryachts and sailing vessels. We can provide on-site
analysis when circumstances require, such as during salvage operations. |
|
|
STRUCTURAL
ASSESSMENTS
DMC&A has long been
involved in assessing and designing vessel structures and is able to
analyse and report on a structure whether Steel, Aluminium alloy or
GRP/FRP and occasionally wood. We can analyse the likely
performance and compare it to the applicable standards |
|
|
PERFORMANCE
ASSESSMENTS
If a vessel does not perform as desired either in
speed, seakeeping characteristics, or other areas, DMC&A can analyse
the problem and make recommendations on rectifications or improvements.
The most frequently requested analysis is to specify an improved propeller
design on vessels not achieving the desired speed. We can attend trials
of new vessels and to advise on performance. From time to time disputes
arise on vessel performance and an independent assessment of this
or attendance to record the performance of the vessel for future information
for the Master or Owners is vital. |
|
|
CLASSIC
YACHT RESTORATION
DMC&A has been involved with many classic and
traditional vessels from routine refits to reconstruction from limited
wreckage remaining. We can survey vessels and provide a specification
for restoration or rebuild together with designs and ongoing inspections
and advice during a project. |
|
|
SUITABILITY
ASSESSMENTS
If you are looking for a vessel with a specific
purpose in mind, such as conversion of a commercial vessel to a yacht,
DMC&A can assist by carrying out an assessment and superficial
survey on a shortlist of available vessels. |
|
|
